Trance Preamp VST3 — Analog Tone Shaper for Trance Production | OMAR G2

TRANCE PREAMP — Analog Tone Shaper VST3 for Trance

The first stage of your trance chain. Console-grade warmth, one plugin.

TRANCE PREAMP by OMAR G2 is an analog-style preamp VST3 designed to give your trance productions the character of a real console channel. Place it at the top of any track, group bus or mix bus and hear your supersaws sound bigger, your basslines gain body, your vocals find presence, and your mix come together.

With just three knobs — INPUT, DRIVE and OUTPUT — you get full control over the gain staging of your signal without ever leaving your DAW. It’s the “console channel” you’ve always wanted, tuned specifically for the trance genre.

TRY IT FREE — DOWNLOAD THE DEMO

Download the free demo and test TRANCE PREAMP in your own productions. The demo is fully functional — the audio is muted for a few seconds at regular intervals until you activate a license.

DOWNLOAD FREE DEMO

SHA-256 CHECKSUM

18303ddd32be33ad690b201bd51d0f6b84a9e70d2a8ab571399b03602fe19e98

Verify the integrity of TrancePreamp-Demo-v1.2.0.zip by comparing this code with the one you get after downloading. If they match, the file is correct.

Get-FileHash "$env:USERPROFILE\Downloads\TrancePreamp-Demo-v1.2.0.zip" -Algorithm SHA256

certutil -hashfile "%USERPROFILE%\Downloads\TrancePreamp-Demo-v1.2.0.zip" SHA256

VST3 · Windows 10/11 64-bit · ~5 MB · No signup required

WHY TRANCE PREAMP?

Most preamp plugins on the market are either complex emulations of historical hardware or one-trick saturation tools. TRANCE PREAMP takes a different approach: it’s a modern analog-style preamp designed specifically for trance, with just the three controls that matter and nothing else.

• Warm, musical character — modeled after the asymmetric response of a triode valve, giving your tracks even-order harmonics that sound expensive, not harsh.
• Three knobs, total control — INPUT, DRIVE and OUTPUT cover everything you need for proper gain staging and tone shaping.
• Works on any source — leads, bass, kick, pads, vocals, drums, and even your master bus.
• 47 trance presets — organized by function (Init, Console, Drums, Bass, Leads, Pads, Vocals, Mastering, FX). From neutral reference points to aggressive character settings.
• IN/OUT meters — dB-scaled meters with smooth decay so you can dial in the right level at a glance.
• Bypass on the logo — click the OG2 logo in the footer to A/B the processing instantly. The glow changes from gold (active) to red (bypassed).
• Instant workflow — no menus, no hidden options. Load it, set the three knobs, done.

WHAT IT DOES

TRANCE PREAMP is a single-stage analog preamp. Its purpose is simple: it gives your signal the character of a real console channel before any other processing.

INPUT — Real Gain

The INPUT knob boosts the level of your signal before it hits the circuit. Push it higher to drive the preamp harder and get more character. It’s the same as the gain knob on a real console channel.

DRIVE — Analog Character

The DRIVE knob controls how much analog character the circuit adds. At 0% the preamp is transparent. At 100% it delivers the full warmth of the triode-style saturation curve. Turn it up and hear your tracks come alive.

OUTPUT — Level Compensation

Use the OUTPUT knob to compensate the level you added with INPUT and DRIVE. This lets you push the circuit hard for character while keeping the final level at unity, so you can A/B honestly.

WHERE TO USE IT IN YOUR DAW

TRANCE PREAMP is designed to be the first processor in your chain — right after the instrument or audio clip, before EQ, compression or saturation.

A typical trance chain looks like this:

Source → TRANCE PREAMP → EQ → Compressor → Saturator → ...
         ↑
    You are here

Here are real examples of where to insert it in your project:

• Lead supersaw track — Put it first, before EQ. INPUT +8, DRIVE 35%. The supersaw gets bigger and warmer without harshness.
• Rolling bassline — First in the bass chain. INPUT +6, DRIVE 30%. The bass gains body and presence that translates on any system.
• Kick track — First, before EQ. INPUT +4, DRIVE 20%. Controlled weight without muddying the low end.
• Group bus (drums, synths, vocals) — First slot of the group. INPUT +3, DRIVE 20%. Gives the group cohesion before any other processing.
• Mix bus (pre-master) — First slot of your mix bus. INPUT +2, DRIVE 15%. Glue and polish for the whole mix.
• Master bus — Optional, with very low settings. INPUT +1, DRIVE 10%. Subtle “console” character across the whole project.

Rule of thumb: the earlier in the chain, the better. TRANCE PREAMP is a gain-staging tool, not an effect. It belongs at the beginning.

THE ANALOG CHARACTER

TRANCE PREAMP uses a single, carefully tuned triode-inspired saturation curve. Unlike plugins that emulate specific vintage hardware, every setting of TRANCE PREAMP shares the same analog voice: smooth asymmetric saturation with even-order harmonics, gentle top-end compression, and a subtle DC blocking stage that keeps the low end clean.

The character changes with DRIVE, not with the preset. At 0% the circuit is transparent. At 100% you get the full warmth of the triode curve. The presets simply explore different amounts of drive and gain staging — from “barely there” (Console Glue) to “clearly analog” (Console Drive).

THE 47 PRESETS

TRANCE PREAMP ships with 47 factory presets, organized by function so you can find the right starting point in seconds. Each category progresses from subtle to aggressive.

Init & Utility (2)

• Init (Bypass) — Fully transparent reference point.
• Init (Unity) — Neutral with a tiny touch of character.

Console (8) — tonal color and gain staging

• Console Clean — Minimal drive. Pure gain staging with a hint of body.
• Console Warm — Subtle warmth. Pads, vocals, mix bus.
• Console Body — Balanced warmth and presence. The all-rounder.
• Console Big — Pronounced low-mid weight. Fat bass, big leads.
• Console Silk — Smooth top end. Beautiful on hats and airy textures.
• Console Bite — Forward mids. Cuts through a dense mix.
• Console Drive — Full audible character. Leads, basslines that need attitude.
• Console Glue — Very subtle. Bus and master glue.

Drums / Percussion (8)

• Kick Weight — Low-end body without mud.
• Kick Punch — Attack and impact.
• Snare Body — Thickness and weight.
• Snare Crack — Aggressive attack.
• Clap Presence — Snap and presence.
• Hi-Hat Smooth — Softens harsh highs.
• Drum Bus Glue — Cohesion for drum groups.
• Perc Drive — Aggressive percussion character.

Bass (6)

• Bass Warmth — Body without muddying.
• Bass Weight — Peso y graves.
• Bass Drive — Audible drive, rock-ready.
• Bass Grit — Aggressive, for dense mixes.
• Sub Warmth — Fat sub frequencies.
• Bass Bus Glue — Cohesion for bass groups.

Leads / Synths (7)

• Lead Smooth — Soft, for melodic leads.
• Lead Warm — Warm without losing detail.
• Lead Presence — Definition and forwardness.
• Lead Bite — Mordant character for trance.
• Lead Aggressive — Heavily driven, for drops.
• Pluck Snap — Attack for plucks and arps.
• Synth Air — Opens the highs on synths.

Pads / Atmos (4)

• Pad Warmth — Soft warmth.
• Pad Air — Opens the top end.
• Pad Glue — Cohesion for pad groups.
• Pad Dark — Darkens and thickens.

Vocals (4)

• Vocal Body — Body and warmth.
• Vocal Air — Air and brilliance.
• Vocal Presence — Intelligibility.
• Vocal Drive — Drive for rock-style vocals.

Mastering / Bus (4)

• Master Glue (Light) — Transparent subtle glue.
• Master Glue (Deep) — Stronger glue.
• Master Warm — Warmth for master.
• Master Wide — Sense of width.

FX / Creative (4)

• FX Riser Glue — Glue for risers.
• FX Grit — Dirt for transitions.
• FX Screamer — Extreme saturation.
• FX Destroy — Controlled destruction.

FEATURED PRESETS — START HERE

While all 47 presets are useful, two of them are the “flagship” settings of TRANCE PREAMP. If you’re new to the plugin, start with one of these two and explore from there.

Console Warm — The All-Rounder

Character: Subtle warmth with gentle body. Clean enough to keep the source intact, warm enough to feel the analog character. This is the “console glue” preset.

Suggested settings: INPUT +4 dB, DRIVE 25%, OUTPUT −3 dB.

Best for:

• Pads and atmospheres — Adds a soft blanket of warmth without losing the air.
• Vocals — Body and presence without harshness. Especially good on trance vocals.
• Supersaws — Rounds off the digital edges and makes the stack sound like one instrument.
• Mix bus — If you want just one preset for the entire mix, this is it.

Why it works: Console Warm is calibrated to sit right in the “sweet spot” of the triode curve — enough drive for the harmonics to be audible, not so much that it colours the source. It’s the preset that makes your tracks sound “expensive” without you knowing exactly why.

Console Drive — The Character Preset

Character: Audible analog character with attitude. The harmonics are clearly present, the top end is slightly compressed, and the source sounds bigger and more forward. This is the “console pushed hard” preset.

Suggested settings: INPUT +10 dB, DRIVE 55%, OUTPUT −7 dB.

Best for:

• Leads — Presence and bite without sounding harsh or digital.
• Basslines — Body and character that translates on any system.
• Plucks and arps — Adds weight and definition to otherwise thin sounds.
• Percussion loops — Glue with attitude for drum loops.
• Group buses — Cohesion with a clear analog signature.

Why it works: Console Drive pushes the circuit enough that the triode saturation becomes the dominant character of the sound. It’s the preset that says “there’s something analog happening here” — and it’s what producers mean when they say a track sounds “warm but present”.

Console Warm vs Console Drive — Which One?

Pro tip: try Console Warm on a track first, then switch to Console Drive and compare. The difference is immediate. Console Warm “warms”, Console Drive “drives”. Both are useful, both sound great — just for different purposes.

HOW TO USE THE PRESETS

Load a preset, then adjust to taste. Here’s a suggested workflow:

1. Start with a preset that matches your source. Lead → “Lead Warm”. Kick → “Kick Weight”. Bass → “Bass Warmth”.
2. Push INPUT until you hear the character you want. Watch the IN meter to see how hard you’re driving the circuit.
3. Adjust DRIVE to taste. 0% for transparent, 100% for full character.
4. Compensate with OUTPUT so the level matches the bypass. This lets you A/B honestly.
5. Use the logo bypass in the footer to compare processed vs. bypassed instantly. Gold = active, red = bypassed.
6. Save as user preset if you want to reuse the setting on another track.

KEY FEATURES

• Analog-style preamp with triode-inspired saturation curve
• Three knobs: INPUT, DRIVE, OUTPUT — nothing else
• 47 presets organized in 9 functional categories
• User presets with save / load / delete
• IN / OUT meters with dB scaling and smooth decay
• Bypass on the logo — click the OG2 logo to A/B
• Automatic gain compensation for smooth gain staging
• Soft clip protection at the output stage
• Full automation — every parameter automatable in your DAW
• Persistent bypass — saved with your project, restores on reload
• Low CPU — can run on every channel of a full session
• Compact interface — 680 × 620, fits any screen

DESIGNED FOR TRANCE PRODUCERS

TRANCE PREAMP is not a generic preamp plugin. It was designed from the ground up for trance production. Every decision — the character curve, the preset selection, the interface — was made with trance producers in mind.

Use it on:

• Uplifting trance — Warmth and presence for supersaws, pads and leads.
• Psytrance — Gain staging and character for rolling basslines and acid leads.
• Progressive trance — Subtle warmth for pads and atmospheric textures.
• Tech trance — Punch and presence for drums and stabs.

Whether you’re producing a peak-time banger or an emotional breakdown, TRANCE PREAMP gives your mix the analog character it deserves.

OMAR G2 — Peak-Time Emotional Energy. Classic Trance, Recharged.

ALREADY TRIED THE DEMO?

If you’ve tested TRANCE PREAMP and want to remove the demo limitations, purchase a license below. Your activation key will be sent to your email immediately after checkout.

BUY TRANCE PREAMP — INSTANT LICENSE

Secure checkout · Instant delivery by email · 2 activations included

INSTALLATION GUIDE

TRANCE PREAMP is delivered as a ZIP file containing the VST3 plugin. No external libraries or additional files are required — everything is bundled inside the plugin.

Step 1 — Download
Download TrancePreamp-Demo-v1.2.0.zip from the demo section above, or from the link sent to your email after purchase.

Step 2 — Extract the ZIP file
Right-click the ZIP and choose Extract All… (Windows built-in), 7-Zip or WinRAR. Inside you will find:

Trance Preamp.vst3

Step 3 — Copy the plugin to the VST3 folder
Copy the Trance Preamp.vst3 folder into:

C:\Program Files\Common Files\VST3

Approve the administrator prompt if Windows asks. That’s it — no DLL, no installer, no dependencies.

Step 4 — Open your DAW
Launch your DAW and run a plugin rescan / refresh the VST3 list if needed.

Step 5 — Load TRANCE PREAMP and activate
Find TRANCE PREAMP in your DAW’s VST3 browser, load it on a track, click ACTIVATE in the plugin footer, paste your license key, and you’re ready to add analog character to your trance productions.

IMPORTANT NOTES

• Designed for Windows 10/11 64-bit, VST3 format only.
• Requires a VST3-compatible DAW (Ableton Live, FL Studio, Cubase, Studio One, Reaper, Bitwig, etc.).
• No external DLLs or runtimes are required — all dependencies are built into the plugin.
• Your DAW may need to rescan plugins after installation.
• If the plugin doesn’t appear, verify the Trance Preamp.vst3 folder is placed inside C:\Program Files\Common Files\VST3.

SUPPORT & GUARANTEE

Every purchase includes email support and a 14-day money-back guarantee — if TRANCE PREAMP doesn’t fit your workflow, contact us for a full refund, no questions asked.

Need help? Write to hello@omarg2.com and we’ll get back to you within 24 hours.