Analog Saturator VST3 — Tube, Tape, Transformer & Transistor Saturation for Trance | OMAR G2

ANALOG SATURATOR — 4-Mode Saturation VST3 for Trance

Warmth. Character. Weight. Four classic colors, one plugin.

ANALOG SATURATOR by OMAR G2 is a 4-mode saturation VST3 plugin designed for trance production. Whether you’re gluing a supersaw, fattening a rolling bass, adding bite to a psy lead or polishing your master bus, ANALOG SATURATOR gives you the four saturation colors that matter most: Tube, Tape, Transformer and Transistor — each with its own character, its own harmonic profile, and its own place in a trance mix.

Built with 4x oversampling, automatic gain compensation, and 48 presets designed specifically for uplifting trance, psytrance, progressive and tech trance, ANALOG SATURATOR sounds analog, feels modern, and fits seamlessly into any trance workflow.

TRY IT FREE — DOWNLOAD THE DEMO

Download the free demo and test ANALOG SATURATOR in your own productions. The demo is fully functional — the audio is muted for a few seconds at regular intervals until you activate a license. No registration required.

DOWNLOAD FREE DEMO

VST3 · Windows 10/11 64-bit · ~5 MB · No signup required

SHA-256 CHECKSUM

eba1f9bc277f4f2cc20927362b19659884d870d9b7b06a757597c2a87c09206b

Verify the integrity of AnalogSaturator-Demo-v1.0.0.zip by comparing this code with the one you get after downloading. If they match, the file is correct.

How to verify this download →

FOUR SATURATION MODELS, FOUR DIFFERENT COLORS

Most saturation plugins give you one flavor and call it a day. ANALOG SATURATOR gives you four — each modeled on the character of a classic analog device, tuned for trance production:

TUBE — Warm Even Harmonics

Modeled after the asymmetric response of a triode valve. Dominant even-order harmonics for a warm, musical, “expensive” sound. Ideal for supersaws, pads, vocals and leads. Adds body without harshness.

TAPE — Soft Compression, Smooth Top

Inspired by reel-to-reel tape saturation. Gradual soft-knee curve, dynamic high-frequency loss with drive, and a gentle head bump at 75 Hz. Ideal for gluing a supersaw stack, smoothing a bright lead, or saturating the master bus.

TRANSFORMER — Thick Low End, Iron Core

Pre-emphasis on low frequencies before saturation, exactly like a transformer core reacting to bass-heavy material. Produces a thick, weighty low end with a natural roll-off at the top. Ideal for kick, sub, 808, and any source that needs weight.

TRANSISTOR — Solid-State Edge

Harder knee, dominant odd-order harmonics, and a subtle asymmetry for a more vintage, less “clinical” character. Ideal for psy leads, acid basslines, plucks, percussion and FX.

WHY ANALOG SATURATOR?

Most saturation tools on the market are either one-trick ponies or complex emulations that sound great only on specific sources. ANALOG SATURATOR was designed around a different idea: four distinct colors, each tuned for trance, all in one plugin.

• Four saturation models — Tube, Tape, Transformer and Transistor, each with its own harmonic profile and tonal character.
• 4x oversampling (switchable 2x / 4x / 8x) — virtually eliminates aliasing even with extreme drive settings.
• Automatic gain compensation — increasing Drive doesn’t change perceived loudness. No more blind A/B confusion.
• Tilt EQ (TONE) — a musical ±8 dB tilt centered at 700 Hz to shape the post-saturation balance.
• MIX control — parallel saturation without extra routing.
• 48 trance presets — organized by sub-genre and instrument: supersaws, rolling bass, psy leads, pads, kicks, snares, claps, hats, vocals, master bus.
• Full automation — every parameter is automatable and recalled with your DAW project.

KEY FEATURES

4 Saturation Models

Tube, Tape, Transformer and Transistor — each with its own character and harmonic profile. Click a card, hear the difference instantly.

Switchable Oversampling (2x / 4x / 8x)

Choose the balance between CPU and audio quality. 4x is the default sweet spot; 8x for critical mastering work; 2x for CPU-limited sessions.

Automatic Gain Compensation

Every mode includes a lookup-based compensation curve that keeps perceived loudness stable across the entire Drive range. Turn the knob without reaching for the output.

TONE — Tilt EQ (±8 dB @ 700 Hz)

A musical tilt EQ to shape the balance between lows and highs after saturation. Positive values brighten, negative values add weight. No filter artifacts, no phase issues.

DRIVE, OUTPUT and MIX

Drive from 0 to 30 dB. Output from −12 to +12 dB. MIX for parallel saturation from 0 to 100%. All parameters smoothed to avoid zipper noise.

48 Trance Presets

Organized by sub-genre and instrument: Uplifting, Psytrance, Progressive, Tech Trance, plus Drums, Vocals and Master presets. Each preset is calibrated for real trance production.

Real-Time IN/OUT Meters

dB-scaled input and output meters with smooth decay. See exactly how much level you’re adding at a glance.

Automation & Project Recall

All parameters are automatable and saved with your DAW project. No workflow surprises when reopening a session.

DESIGNED FOR TRANCE PRODUCERS

ANALOG SATURATOR is not a general-purpose saturation plugin with a trance preset slapped on top. Every design decision — the four models, the TONE range, the preset selection — was made with trance production in mind.

Use it on:

• Supersaws and leads — Tube or Tape for warmth and glue without harshness.
• Rolling basslines — Tape for harmonics that translate on any system.
• Psy bass and acid lines — Transistor for edge and presence.
• Kick and sub — Transformer for weight without muddying the mix.
• Pads and atmospheres — Tube or Tape at low drive for subtle warmth.
• Master bus — Tape at very low drive for gentle glue and polish.
• Vocals and FX — Tube for body, Transistor for character.

Whether you’re producing uplifting trance, psytrance, progressive trance or tech trance, ANALOG SATURATOR gives you the analog character your mixes have been missing.

OMAR G2 — Peak-Time Emotional Energy. Classic Trance, Recharged.

ALREADY TRIED THE DEMO?

If you’ve tested ANALOG SATURATOR and want to remove the demo limitations, purchase a license below. Your activation key will be sent to your email immediately after checkout.

BUY ANALOG SATURATOR — INSTANT LICENSE

Secure checkout · Instant delivery by email · 2 activations included

INSTALLATION GUIDE

ANALOG SATURATOR is delivered as a ZIP file containing the VST3 plugin. No external libraries or additional files are required — everything is bundled inside the plugin.

Step 1 — Download
Download AnalogSaturator-Demo-v1.0.0.zip from the demo section above, or from the link sent to your email after purchase.

Step 2 — Extract the ZIP file
Right-click the ZIP and choose Extract All… (Windows built-in), 7-Zip or WinRAR. Inside you will find:

Analog Saturator.vst3

Step 3 — Copy the plugin to the VST3 folder
Copy the Analog Saturator.vst3 folder into:

C:\Program Files\Common Files\VST3

Approve the administrator prompt if Windows asks. That’s it — no DLL, no installer, no dependencies.

Step 4 — Open your DAW
Launch your DAW and run a plugin rescan / refresh the VST3 list if needed.

Step 5 — Load ANALOG SATURATOR and activate
Find ANALOG SATURATOR in your DAW’s VST3 browser, load it on a track, click ACTIVATE in the plugin footer, paste your license key, and you’re ready to add analog character to your trance productions.

VERIFY YOUR DOWNLOAD

After downloading the demo ZIP, you can verify that the file is intact and authentic by checking its SHA-256 checksum.

SHA-256:
eba1f9bc277f4f2cc20927362b19659884d870d9b7b06a757597c2a87c09206b

Windows (PowerShell)
Open PowerShell and run (adjust the path to where you saved the file):
Get-FileHash -Path "C:\Users\YourName\Downloads\AnalogSaturator-Demo-v1.0.0.zip" -Algorithm SHA256

Windows (Command Prompt)
Open Command Prompt and run:
certutil -hashfile "C:\Users\YourName\Downloads\AnalogSaturator-Demo-v1.0.0.zip" SHA256

If the resulting hash matches the SHA-256 above, your file is intact and authentic. If it doesn’t match, delete the file, download it again, and verify once more. If the mismatch persists, contact support.

IMPORTANT NOTES

• Designed for Windows 10/11 64-bit, VST3 format only.
• Requires a VST3-compatible DAW (Ableton Live, FL Studio, Cubase, Studio One, Reaper, Bitwig, etc.).
• No external DLLs or runtimes are required — all dependencies are built into the plugin.
• Your DAW may need to rescan plugins after installation.
• If the plugin doesn’t appear, verify the Analog Saturator.vst3 folder is placed inside C:\Program Files\Common Files\VST3.

SUPPORT & GUARANTEE

Every purchase includes email support and a 14-day money-back guarantee — if ANALOG SATURATOR doesn’t fit your workflow, contact us for a full refund, no questions asked.

Need help? Write to hello@omarg2.com and we’ll get back to you within 24 hours.